InterNEC I7-H0704/08/16Vh User Manual Download Page 113

Page: 113 / 192

User Manual of Digital Video Recorder

112

8.5

Handling Exceptions

Purpose:

Exception settings refer to the handling method of various exceptions, e.g.



HDD Full:

The HDD is full.



HDD Error:

Writing HDD error, unformatted HDD, etc.



Network Disconnected:

Disconnected network cable.



IP Conflicted:

Duplicated IP address.



Illegal Login:

Incorrect user ID or password.



Video Signal Exception:

Unstable video signal.



Input / Output Video Standard Mismatch:

I/O video standards do not match.



Record Exception:

No space for saving recorded files.

Note:

Input / Output Video Standard Mismatch and Video Signal Exception are not supported by IP camera.

Steps:

Enter Exceptions interface and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter 8.6

for detailed alarm response actions.

Figure 8. 18

Exceptions Settings Interface

Summary of Contents for I7-H0704/08/16Vh

































































































































































































Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Brands by name

Popular brands

InterNEC I7-H0704/08/16Vh, User Manual

Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Brands by name

Popular brands