InterNEC I7-H0704/08/16Vh User Manual Download

Page: 127 / 192

User Manual of Digital Video Recorder

126

Enter

Alarm Host IP

and

Alarm Host Port

in the text fields.

The

Alarm Host IP

refers to the IP address of the remote PC on which the CMS (Client Management

System) software (e.g., iVMS-4200) is installed, and the

Alarm Host Port

must be the same as the alarm

monitoring port configured in the software.

Figure 9. 21

Configure Alarm Host

Click

to save and exit the interface.

9.2.7

Configuring Multicast Settings

Purpose:

The multicast can be configured to realize live view for more than 128 cameras through network.

A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP

address ranging from 239.252.0.0 to 239.255.255.255.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

More Settings

tab to enter the More Settings interface.

Set

Multicast IP

, as shown in figure below. When adding a device to the CMS (Client Management

System) software, the multicast address must be the same as the device‟s multicast IP.

Figure 9. 22

Configure Multicast

Click

to save and exit the interface.

9.2.8

Configuring RTSP Settings

Purpose:

Summary of Contents for I7-H0704/08/16Vh

































































































































































































Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Related manuals for I7-H0704/08/16Vh

Brands by name

Popular brands

InterNEC I7-H0704/08/16Vh, User Manual

Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Related manuals for I7-H0704/08/16Vh

Brands by name

Popular brands