InterNEC I7-H0704/08/16Vh User Manual Download

Page: 156 / 192

User Manual of Digital Video Recorder

155

11.2

Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area

from being live viewed and recorded.

Steps:

Enter the Privacy Mask Settings interface.

Menu > Camera > Privacy Mask

Select the camera to set privacy mask.

Check

checkbox to enable privacy mask.

Figure 11. 3

Privacy Mask Settings Interface

Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.

Note:

Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.

The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear

Zone1-4 icons on the right side of the window, or click

to clear all zones.

Figure 11. 4

Set Privacy Mask Area

You can click

to copy the privacy mask settings of the current camera to other cameras. Please

refer to step 7 of

Chapter 11.1 Configuring OSD Settings

Note:

Copying the privacy mask settings to network cameras is not available.

Click

to save the settings.

Summary of Contents for I7-H0704/08/16Vh

































































































































































































Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Related manuals for I7-H0704/08/16Vh

Brands by name

Popular brands

InterNEC I7-H0704/08/16Vh, User Manual

Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Related manuals for I7-H0704/08/16Vh

Brands by name

Popular brands