InterNEC I7-H0704/08/16Vh User Manual Download

Page: 91 / 192

User Manual of Digital Video Recorder

Figure 7. 4

Checkup of Quick Export Result Using USB1-1

7.1.2

Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer) and DVD-R/W.

Backup using USB flash drives, USB HDDs, USB writer and DVD-R/W

Steps:

Enter Export interface.

Menu>Export>Normal

Set search condition and click

to enter the search result interface.

Notes:

Six different Record types are selectable: Continuous, Motion, Alarm, Motion | Alarm, Motion &

Alarm, Command Triggered and Manual. The command triggered record is configured by the

platform when the device accessed via the platform.

Two different File types are selectable: Unlocked and Locked.

Figure 7. 5

Normal Video Search for Backup

Select record files you want to back up.

Summary of Contents for I7-H0704/08/16Vh

































































































































































































Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Related manuals for I7-H0704/08/16Vh

Brands by name

Popular brands

InterNEC I7-H0704/08/16Vh, User Manual

Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Related manuals for I7-H0704/08/16Vh

Brands by name

Popular brands