International HS 2.8L, Service Manual

Page: 94 / 130

9 3
International HS 2.8L Engine Timing
8120081 - 05/02 - Service Manual
INTERNATIONAL ENGINES
FUEL INJECTION PUMP PULLEY
Removal
1. Follow distribution belt removal procedure,
see DISTRIBUTION BELT - Removal, but
only loosen tensor bolt and remove belt after
the following steps.
2. Loosen the three pulley central bolts.
3. Remove pump limiter and retighten bolt to
lock the pump.
4. Remove tool nr. 8130633 pin from pulley.
5. Remove the three bolts and then remove
plate and pulley.
Note: It is important to assure that, once locked fuel injection pump, any attempt to turn pump
cannot be made. Take care to do not allow crankshaft to be turned.
Reinstallation
Note: Camshaft and injetion pump pulleys are the same, even so they are assembled in
inverse way.
1. Install pulley, positioning it in way that timing
mark keep turned backwards.
2. Install plate and fix it with three bolts.
3. Install tool nr. 8130633 pin in fuel injection
pump pulley and fit it in the pump flange.
4. Reinstall limiter to unlock pump.
5. Install distribution belt, see DISTRIBUTION
BELT - INSTALLATION