International HS 2.8L, Service Manual

Page: 56 / 130

International HS 2.8L Cylinder Head
5 5
8120081 - 05/02 - Service Manual
INTERNATIONAL ENGINES
5. Loosen intake manifold lower fixation nuts,
positioned under the exhaust manifold.
6. Remove intake manifold upper fixation bolts.
7. Raise intake manifold only, covering the
openings in the cylinder head with a clean
cloth to prevent the fall of any component in
the engine.
Reinstallation
1. Clean intake manifold contact surface and
reinstall it with a new gasket, in the inverse
order of the removal, tightening bolt within
22 to 28 Nm.
EXHAUST MANIFOLD
Removal
1. Remove turbocharger, see
TURBOCHARGER - Removal.
2. Remove exhaust manifold fixation nuts,
removing first lower central nut.
3. Remove gasket.
4. Clean contact surfaces.