International HS 2.8L, Service Manual

Page: 54 / 130

International HS 2.8L Cylinder Head
5 3
8120081 - 05/02 - Service Manual
INTERNATIONAL ENGINES
Note: Use special tool nr. 8130625 (Goniometry).
12. Install valve caps rods.
13. Install camshaft rods on their original
positions.
14. Install rocker arm shaft, see ROCKER ARM
SHAFT - Installation.
15. Adjust valves clearance, see VALVES
CLEARANCE ADJUSTMENT.
16. Install valves cover, making sure that the
gasket is good for the continuous use.
Note: Valves cover gasket can be reused twice, at maximum.
17. Fix valves cover with special sealing washers
and nuts tightened according to specification.
18. Lubricate “o” ring with engine oil and install it
in the breather valve. Install valve and fix it
with the bolt, tightening according to
specification.
19. Reinstall the remaining items inverting the
operations, tightening bolts according to
specification, whenever applicable.
Inspection after assembly
1. Start the engine. Check the correct lubricant
oil pressure and all engine parts for leakages.
2. Warm the engine up to normal operation
temperature see TECHNICAL
SPECIFICATIONS, varying its speed.
3. Stop the engine.
4. If necessary adjust valves clearance again,
see VALVES CLEARANCE ADJUSTMENT.
Note: It is not necessary to retighten cylinder head during the revisions.