International HS 2.8L, Service Manual

Page: 55 / 130

International HS 2.8L Cylinder Head
5 4
Service Manual - 8120081 - 05/02
INTERNATIONAL ENGINES
TURBOCHARGER
Removal
1. Loosen clamp and disconnect turbocharger
inlet pipe from intake manifold.
2. Loosen clamp and disconnect breather hose
from turbocharger inlet elbow.
3. Loosen clamp and disconnect air filter hose.
4. Remove inlet elbow, loosening support bolts.
5. Loosen lower exhaust pipe in the silencer
flange nuts, making sure if the pipe turns
freely.
6. Remove turbocharger outlet elbow from
exhaust pipe.
7. Position an appropriate recipient under the
engine and remove banjo bolt from
turbocharger lubrication pipe and disconnect
turbocharger oil return pipe from cylinder
block.
8. Loosen turbocharger fixation prisoners nuts
from exhaust manifold, removing it carefully.
Reinstallation
1. Reinstall in inverse order of removal.
INTAKE MANIFOLD
Removal
1. Loosen clamp and disconnect turbocharger
inlet pipe from intake manifold.
2. Remove valve fixation bolts and vacuum
derivation and remove the set.
3. Remove bolt that fix intake manifold to intake
elbow from turbocharger.
4. Remove boost pipe control banjo bolt.