Section 8, Operating the Hurricane
®
Chinook Heating System
8-4
The Hurricane
®
Chinook Heating System
8.3 Turning the Power to the Hurricane
®
Chinook Heating System ON
•
The Hurricane
®
Chinook Heating System’s main Control Panel
(
Figure 8-2),
located on the front of the heater, contains three
push buttons: ON/OFF power, Bypass, and Reset. The power
switch must be pushed ON (power LED will turn ON) to turn
the DC electrical power to the main control board ON and is
required to be left ON whenever heat is required.
•
The Zone Control board (
Figure 8-4
) will be powered
whenever the master disconnect switch is ON. The master
disconnect switch must be left ON whenever heat is required.
•
When the Hurricane
®
Chinook Heating System is shut down
for any extended period or the season, it is recommended
that the power switch and the battery master disconnect
switch be turned OFF.
Figure 8-2 Hurricane
®
Chinook Main Control Panel
