Section 8, Operating the Hurricane
®
Chinook Heating System
8-2
The Hurricane
®
Chinook Heating System
•
Support for high flow domestic hot water demand. The
system increases ground water temperature by 60F(15C) at a
flow of 1.5 GPM (using only the diesel burner). An integral
thermo regulating valve (mixing valve) pre-set to maintain
domestic water temperature at 120(49C)F. The mixing valve
is adjustable from 75F(24C) to 145F(63C)
•
Easy to install and field serviceable with access panels,
electrical hookups and connections easily accessible from the
top of the heater.
•
Easy to fill and purge, zero pressure system.
•
Easy to drain.
•
A high-temperature, stainless steel burner and a 7 US gallon
welded and insulated stainless steel coolant tank. The coolant
tank is designed to minimize heat loss and optimize heat
recovery.
•
Domestic water flow switch for quick response to domestic
hot water demand.
•
Low coolant level detection.
•
“Never-Run-Dry” circulation pump protection
•
Quiet operation.
•
Low pressure fuel system with built-in fuel pump.
•
Fuel efficient burner capable of burning a wide variety of
diesel-based fuels (CSA/UL certified for diesel #1 and #2).
•
Exhaust has minimal smoke and smell.
•
Fan assisted, sealed combustion chamber designed to use
outside combustion air.
•
Simple, low amperage draw ignition.
•
Electronically-controlled system with:
•
automatic Safety Shutdown;
•
manual-resettable aquastats for overheat safety
protection.
•
LED indicators on the Control Panel for diagnostics.
•
Patented, proprietary flame sensor.
