User Type
Numeric ID
Description
Relock
6
Relock codes are used to relock the door
when a toggle or auto-unlock is active.
Entering 00 # prior to a relock code allows
auto-unlock to be re-triggered, when First In
is enabled.
Emergency
7
Emergency users are special users that
cannot be locked out and cannot be
disabled.
The user also uses the unlock duration
programmed in command 32 parameter 3.
The default unlock time is 10 seconds.
4.2.2.A Programming User Data, Command 50,
Full Format
The full format of command 50 for programming user
data is as follows:
50 # user-type # user location # keypad
PIN * keypad PIN *
Programming a user’s card with command 50 requires
that you present the card to the proximity reader after
entering the final asterisk
*
.
A single beep from the sounder indicates that the card
has been read and the data added to the user’s entry.
If the yellow LED lights steadily after the card is pre-
sented, it usually indicates one of two problems: (1)
an improper keypress (correct by entering properly),
or (2) the number entered is in use by another user
(correct by employing an unused PIN and card).
Table 4-3. prox.pad plus User Types
(continued)
4.2 Programming Users
Chapter 4: Programming
prox.pad plus Install/Program. Manual, PPP, D2
4-9
