Intermec Trakker Antares 2475, User Manual, Page: 36 / 104

Chapter 1— Learning About the Terminal
22 Trakker Antares 2475 Vehicle-Mount Terminal User’s Manual
For more information about these commands, see Chapter 6,
“Configuration Command Reference,” in the 2400 Family system manual.
Defining the Terminal’s Memory and Drives
The Trakker Antares 2475 terminals come with the following memory and
drives:
Drive D or font set
Drive E
Drive G
2475U035.eps
Optional 2MB
(of the total 4MB)
flash memory
Drive C
750K flash drive
256K configurable
RAM drive
Optional 2MB or
4MB extended
storage drive
2475 Terminal Drives
Drive C
Drive C is a 2MB flash drive. You can use up to 750K of this flash drive to
store up to 128 files on drive C. Applications must be stored on drive C.
You use standard ANSI C library interface definitions to access the
information on this drive.
Drive D or Font Set
Drive D or font set is an optional 2MB of flash memory. If you order the
4MB flash memory option, you can configure 2MB as drive D. Use this
flash drive to store large lookup tables and data files. You can store up to
128 files on drive D. You can also use the 4MB flash memory option to
store double-byte fonts. To configure this flash memory, see “Configuring
Drives and Memory on the Terminal” on page 35.
Note: If you have a terminal with the 802.1x TTLS security option, drive
D is not available to store files or double-byte fonts. For more information
about configuring 802.1x TTLS security, see “Configuring 802.1x TTLS
Security” on page 50.