Intermec Trakker Antares 2475, User Manual, Page: 18 / 104

Chapter 1— Learning About the Terminal
4 Trakker Antares 2475 Vehicle-Mount Terminal User’s Manual
The 2475 ships with these other standard features:
• 512K RAM reserved for applications
• 750K flash drive to store user applications and files
• IEEE 802.11b radio for RF communications
• Scanner port to attach a scanner
• Serial port for RS-232 communications with other RS-232 devices
• Environmental sealing of IP54
Options for the Terminals
These options are available for the 2475 terminals:
• Programmable terminal with 59-key alphanumeric keypad and overlays
for U.S. English or International languages.
• Extended SRAM storage drive (2MB or 4MB) to store files
• 4MB flash memory configured as an additional 2MB flash drive for
custom applications (except .BIN files) and files, pre-loaded with
different Asian fonts, or configured for 802.1x TTLS security.
• IBM 3270, IBM 5250, and VT100/220/320/340 and ANSI TE 2000
terminal emulation application with keypad and overlay
• UDP Plus (Intermec Gateway or DCS 30X network), WTP (Intermec
Gateway or DCS 30X to host), or TCP/IP network protocol
• Data Collection Browser
™
(dcBrowser
™
) application
• Trakker Antares ROM-DOS
™
support
This manual explains how to use the features and options available on the
Trakker Antares 2475 terminals.
For additional help using terminal emulation, see the appropriate TE 2000
guide:
• TE 2000 5250 Terminal Emulation Programmer’s Guide
(P/N 977-055-004)
• TE 2000 3270 Terminal Emulation Programmer’s Guide
(P/N 977-055-003)
• TE 2000 VT/ANSI Terminal Emulation Programmer’s Guide
(P/N 977-055-005)
For additional help using dcBrowser, see the online help that ships with
the dcBrowser gateway software, or see the
Data Collection Browser Client
User’s Guide (P/N 070011).