Intermec EasyCoder C4, Reference Manual

Page: 148 / 152

142 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Appendix A — Error-Handling
Error Types
Classifi ed types of error & status codes for the Error Replies table later in
this appendix.
Type Feature Generates Recovered by
A Minor Error
of command
sequences and
similar. At Error reporting (cmd
US ): Sets error on print
command and sets Orange
LED or Red LED.
At no Error reporting (cmd
UN ): Green LED, at print
command
At Error reporting (cmd US ):
FEED key or command Reset
^@ . See Also command USA .
At no Error reporting (cmd
UN ): No recover necessary,
already done.
B Print Stopping
Error. Sets Orange LED or red
LED. Feed Key or command Reset
^@ .See also command USB .
C Paper End
Stopping
Error. Sets red LED, at print. Load new media and press
FEED key or command Reset
^@ .
D Error of
printing
functionality
and status. Sets red LED direct,
sometimes blinking. Manual or automatic
(temperature lowered) measure
or command Reset
^@ .
E Status
changes. No LED change. No recover necessary/Delete
Label from LTS. See also
command
USE .
F Unrecoverable
Error. Sets red LED direct. Power Off/Power On or
command Reset
^@ .
G Dump mode. Green LED in dump mode. Feed Key or command Reset
^@ .