manualshive.com logo in svg

Intermec DCS 300, User Manual, Page: 407 / 452

Share
Download
Intermec DCS 300 User Manual Download Page 407

Upgrading the DCS 300 and Devices

B-17

B

To view details of a firmware file or application

•

From the Firmware File Sets dialog box, select a system file (firmware) or an
application and then choose Details. This message box appears:

Choose Close to close the message box and return to the Firmware File Sets
message box.

To delete firmware and applications from the DCS 300

1. From the Firmware File Sets dialog box, select a system file (firmware) or an

application to delete.

2. Choose Delete. A message box appears confirming that you want to delete the

system file or application.

3. Choose Delete. The file is removed from the DCS 300.

Summary of Contents for DCS 300





































































































































































































































































































































































































































































Reviews:

No comments