Intermec DCS 300 User Manual Download Page 302

Page: 302 / 452

DCS 300 User’s Manual

10-44

Capturing Keystrokes

Before you can use the capture keystrokes feature, you must start a temporary host
session. For help, see “Starting a Host Session” in Chapter 9.

To capture keystrokes

1. From the Host Screen Region Definition dialog box, check the Keystrokes to clear

check box.

2. Choose Capture. The Capture Keystrokes dialog box appears.

Note:

If you do not want to capture the keystrokes, you can type them into the

Selected Keystrokes field. Go to Step 6.

3. Choose Start.

4. In the host window, enter the keystrokes to clear the region. The Script Builder

Tool captures all the keystrokes that you type.

5. When you finish entering the keystrokes, choose Stop. The keystrokes you typed

appear in the Captured Keystrokes box.

6. If necessary, edit the keystrokes. For help, see “Editing the Captured Keystrokes”

earlier in this chapter.

7. Choose OK to return to the Script Builder Tools window.

Summary of Contents for DCS 300





































































































































































































































































































































































































































































Search results

Summary of Contents for DCS 300

Reviews:

Intermec DCS 300, User Manual, Page: 302 / 452

Search results

Summary of Contents for DCS 300

Reviews: