manualshive.com logo in svg

Interlogix UltraView PTZ, Installation Manual

Share
Download
Interlogix UltraView PTZ Installation Manual Download Page 50

UltraView PTZ
Installation Manual

40

Contacting us

For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any 
other documentation provided.  If you still have questions, contact us during business hours (Monday through 
Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time).  

Note:  

Be ready at the equipment before calling. 

Online 

Another great resource for assistance with your Interlogix product is our online publication library.  To access 
the library, go to our website at the following location: 

http://www.interlogix.com

1

Table 9.

Sales and support contact information

Sales

Technical support

Phone:

Toll-free:

  888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada. 

Outside the toll-free area:  503.885.5700. 

E-mail

[email protected]

Fax

888.329.0331

888.329.0332

1.

Many Interlogix documents are provided as PDFs (portable document format).  To read these documents, you will 
need Adobe Reader, which can be downloaded free from Adobe’s website at 

www.adobe.com

.

Summary of Contents for UltraView PTZ





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands