Interlogix UltraView PTZ, Installation Manual

Page: 45 / 68

Chapter 4
Camera assembly, shroud, bubble dome
35
Figure 28.Attaching the bubble dome to the housing (cameras not shown to show safety clips clearly)
Cameras not shown
in diagrams
so that safety clips
are clearly visible.
Flush-mount housing and bubble ring
Safety cable
Self-locking, quarter-turn
captive bubble screws (3)
Safety clip
Self-locking, quarter-turn
captive bubble screws (3)
Safety cable
Safety clip
Plastic pendant-mount housing and bubble ring
O-ring
(ensure it is in place
around the bubble ring)
Tamper-resistant
threaded captive
bubble screws (6)
Safety cable
Cast aluminum (rugged) pendant-mount housing
and bubble ring
Safety clip
Safety sable
Keylock latch
Bubble slots (2)
Bubble tabs (2)
Safety clip
Heavy duty housing and bubble ring
Flush-mount housing
and dome ring
Plastic pendant-mount housing and
dome ring
Rugged vandal-resistant pendant-mount
housing and dome ring
Heavy duty housing
and dome ring
Self-locking, quarter-turn
captive dome screws (3)
Self-locking, quarter-turn
captive dome screws (3)
Safety clip
Safety cable
Safety clip
Safety cable
O-ring
(ensure it is in place
around the dome ring)
Tamper-resistant
threaded captive
dome screws (6)
Safety clip
Safety clip
Safety cable
dome slots (2)
dome tabs (2)
Safety cable
Keylock latch
Note: Use the provided
Torx-pinned bit.
CAUTION: Do not use a power
drill with the self-
locking, quarter turn
captive screws.