TruVision IP Compact PTZ Camera Configuration Manual
43
2. Select one alarm output channel from the
Alarm Output
drop-down list. You can
also set a name for the alarm output.
3. The delay time can be set to 5 s, 10 s, 30 s, 1 min, 2 min, 5 min, 10 min or Manual.
The delay time refers to the time duration that the alarm output remains in effect
after alarm occurs.
4. Set the arming schedule for the alarm output. See “Motion detection alarms” on
page 39 for more information on scheduling.
5. To copy the alarm setup to another alarm input, select one of the options shown
under
Copy to Alarm
.
6. Click
Save
to save changes.
Exception alarms
You can set up the camera to notify you when irregular events occur and how you
should be notified. These exception alarms include:
• HDD Full:
All recording space of NAS is full.
Note:
As the SD card is in overwrite mode by default, it will never trigger a
HDD Full
alarm.
• HDD Error:
Errors occurred while files were being written to the storage, no storage
or storage had failed to initialize.
• Network Disconnected:
Disconnected network cable.
• IP Address Conflicted:
Conflict in IP address setting.
