Interlogix TruVision TVP-5101 Configuration Manual Download Page 14

Page: 14 / 79

TruVision IP Compact PTZ Camera Configuration Manual

Item

Description

Security

Defines who can use the camera, their passwords and access privileges,
RTSP authentication, IP address filter, and telnet access.

Network

Defines the network parameters required to access the camera over the
internet.

Video/Audio

Defines recording parameters.

Image

Defines the image parameters, OSD settings and text overlay.

PTZ

Defines the PTZ parameters and privacy masking.

Alarm/Event
Setup

Defines motion detection, tamper-proof, alarm input/output, exception,
and audio exception detection.

Storage

Defines recording schedule, storage management, NAS configuration
and snapshot configuration.

Local configuration

Use the Local menu to manage the protocol type, live view performance, and local
storage paths. In the Configuration panel, click

Local Configuration

to display the local

configuration window. See Figure 3 below for descriptions of the different menu
parameters.

Figure 3: Example of a configuration window

Parameters

Description

Live View Parameters

1. Protocol

Specifies the network protocol used.

Options include: TCP, UDP, MULTICAST and HTTP.

2. Latency

Specifies the transmission speed.

Options include: Shortest Delay, Balanced or Fluent.

Summary of Contents for TruVision TVP-5101
















































































Search results

Summary of Contents for TruVision TVP-5101

Reviews:

Related manuals for TruVision TVP-5101

Brands by name

Popular brands

Interlogix TruVision TVP-5101, Configuration Manual

Search results

Summary of Contents for TruVision TVP-5101

Reviews:

Related manuals for TruVision TVP-5101

Brands by name

Popular brands