Camera operation
This chapter describes how to use the camera once it is installed and configured.
Logging on and off
You can easily log out of the camera browser window by clicking the
Logout
button on
the menu toolbar. You will be asked each time to enter your user name and password
when logging in.
You can change the language of the interface from the drop-down menu in the top right
corner of the window.
Figure 23: Login dialog box
If you do not change the default password of admin, a message will always pop up
requesting you to do so. It is highly recommended to change the Admin password upon
first use for enhanced security.
Live view mode
Once logged in, click “Live View” on the menu toolbar to access live view mode. See
Figure 1 on page 6 for the description of the interface.
Start/stop live view
: You can stop and start live view by clicking the
Start/stop live view button on the bottom of the window.
Record
: You can record live video and store it in the directory you have
configured. In the live view window, click the
Record
button at the
bottom of the window. To stop recording, click the button again.
Take a snapshot
: You can take a snapshot of a scene when in live
view. Simply click the
Capture
button located at the bottom of the
window to save an image. The image is in JPEG format. Snapshots are
saved on the hard drive.
72
TruVision Stainless Steel IP Cameras Configuration Manual
