Camera configuration
This chapter explains how to configure the cameras through a web browser.
After the camera hardware has been installed, configure the camera’s settings through
the web browser. Administrator rights are required to configure the cameras over the
internet.
The camera web browser permits configuration of the camera remotely using a PC.
Web browser options may vary depending on camera model.
There are two main menus in the configuration panel:
Local configuration
Configuration
Configuration menu overview
Use the Configuration panel to configure the network, camera settings, alarms, users,
transactions and other parameters such as upgrading the firmware. See Figure 2 below
for descriptions of the configuration menus available.
Figure 2: Configuration window (Device Information tab selected)
Configuration menus
Description
1.
System
Defines basic device information including SN, the current firmware
version, time settings, maintenance, and serial port parameters. See
“System time” on page 11 for further information.
2.
Network
Defines the parameters required to access the camera over a network.
See “Network settings” on page 12 for further information on the setup.
3.
Video/Audio
Defines recording parameters.
8
TruVision Stainless Steel IP Cameras Configuration Manual
