Figure 18: Region entrance detection window
To define region entrance detection:
1. From the menu toolbar, click
Configuration
>
Smart Event
>
Region Entrance
Detection
.
2. Select the
Enable Entrance Detection
check box to enable the function.
3. Choose the region number to be configured.
4. Click
Draw Area
, and then draw a rectangle on the image as the designated region.
When you draw the rectangle, all lines should connect end-to-end to each other. Up
to four areas are supported. Click
Clear
to clear the areas you have drawn. The
designated region parameters can be set up separately.
Note
: The area can only be quadrilateral.
5. Set the sensitivity level.
The sensitivity value defines the size of the object that can trigger the alarm. When
the sensitivity is high, a small object can trigger the alarm. The range is between 1
and 100.
6. Click
Edit
to set the arming schedule for the alarm input. See “Motion detection
alarms” on page 30 for more information.
7. Specify the linkage method when an event occurs. Select one or more response
methods for the system when an intrusion detection alarm is triggered.
50
TruVision Stainless Steel IP Cameras Configuration Manual
