Parameter
Description
Smart IR (supported
cameras only)
When enabled, it can avoid over exposure of an image due to IR
LED glare.
IR Light (supported
cameras only)
Select ON/OFF to Enable/disable IR.
Enable
: the IR illuminators will be ON when the camera switches to
night mode.
Disable
: the IR illuminators will be OFF when the camera switches
to night mode
Note
: The IR illuminators are always OFF in Daytime mode.
6. Backlight Settings
BLC Area
If you focus on an object against strong backlight, the object will be
too dark to be seen clearly. BLC compensates for the background
light so that the image in the foreground is clear. OFF, Up, Down,
Left, Right, and Center are selectable. When WDR is enabled, BLC
cannot be configured.
WDR
When enabled, this feature (wide dynamic range) allows you to see
details of objects in shadows or details of objects in bright areas of
frames that have high contrast between light and dark areas.
HLC
High Light Compression function can be used when there are high
light levels in the scene affecting the image quality.
7. White Balance
White Balance
White balance (WB) sets the relative parameters for the color white
in the camera. Based on this information, the camera will continue
to display all colors correctly even when the color temperature of
the scene changes such as from daylight to fluorescent lighting.
Select one of the options:
MWB:
Manually adjust the color temperature to meet your
requirements.
AWB1:
Adjust within a range of 2500 to 9500K
,
for environments
where the lighting is always stable.
Locked WB:
Locks the WB to the current environment color
temperature.
Incandescent Lamp:
For use with incandescent lighting.
Warm Light Lamp:
For use where the indoor light is warm.
Natural Light:
For use with natural light.
Fluorescent Lamp:
For use where there are fluorescent lamps
installed near the camera.
8. Image Enhancement
Digital Noise
Reduction
Digital noise reduction (DNR) reduces noise, especially in low light
conditions, to improve image performance.
Options include: Normal Mode, Expert Mode, or OFF. Default is
Normal.
Noise Reduction
Level
Set the level of noise reduction. Higher value has a higher level of
noise reduction. Default is 50.
Defog Mode
You can enable the defog function when the environment is foggy
and obscures the image. It enhances the subtle details so that the
image appears clearer.
EIS
Electrical Image Stabilizer reduces the effects of camera vibration
for the image.
TruVision Stainless Steel IP Cameras Configuration Manual
25
