4. Click
Edit
to edit the arming schedule for tamper-proof alarms. The arming schedule
configuration is the same as that for motion detection. See “To set up motion
detection” for more information.
5. Specify the linkage method when an event occurs. Select one or more response
methods for the system when a tamper-proof alarm is triggered.
Notify Alarm Recipient
Send an exception or alarm signal to the remote management
software when an event occurs.
Send Email
Sends an email to a specified address when there is an alarm
triggered.
Note:
You must configure email settings before enabling this
option. See “To set up the email parameters” on page 17 for
further information. If you want to send the event snapshot
together with the email, select the Attached Snapshot option.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs. Select
Select All
or each individual alarm output.
Note:
This option is only supported by cameras that feature an
alarm output.
6. Click
Save
to save changes.
Exception alarms
You can set up the camera to notify you when irregular events occur and how you
should be notified. These exception alarms include:
• HDD Full:
All recording space of NAS or local storage is full.
• HDD Error:
Errors occurred while files were being written to the storage, no storage
is present or the storage failed to initialize.
• Network Disconnected:
Disconnected network cable.
• IP Address Conflicted:
Conflict in IP address setting.
• Invalid Login:
Wrong user ID or password used to login to the cameras.
Figure 12: Exception window
To define exception alarms:
1. From the menu toolbar, click
Configuration
>
Basic
Event
>
Exception
.
2. Under
Exception Type
, select an exception type from the drop-down list.
TruVision Stainless Steel IP Cameras Configuration Manual
37
