Figure 13: Face detection window
To define face detection:
1. From the menu toolbar, click
Configuration
>
Smart Event
>
Face Detection
.
2. Select
Enable Face Detection
to enable the function.
3. Select
Enable Dynamic Analysis
for
Face Detection
if you want the face detected
to be marked with a green frame in live view.
Note:
If you do not want the detected face marked with the green frame, select
Disable
from Configuration > Local Configuration > Live View Parameters > Rules.
4. Configure the sensitivity of the face detection. The range is between 1 and 5.
5. Click
Edit
to set the arming schedule for the alarm input. See “Motion detection
alarms” on page 30 for more information.
6. Specify the linkage method when an event occurs. Select one or more response
methods for the system when a face detection alarm is triggered.
40
TruVision Stainless Steel IP Cameras Configuration Manual
