3. Select the required format of the snapshot, such as JPEG.
4. Select the required resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds or seconds.
6. Under
Capture Number
, enter the total number of snapshots that should be taken.
7. Click
Save
to save changes.
NAS settings
You can use a network attached storage (NAS) device to remotely store recordings.
To configure recording settings, please ensure that you have the network storage
device within the network. The NAS disk should be available within the network and
correctly configured to store the recorded files, log files, etc.
Notes
:
1. Cameras can record to up to eight NAS devices.
2. The recommended capacity of NAS is between 9G and 2T; other capacities may
cause a formatting failure.
Figure 22: NAS window
TruVision Stainless Steel IP Cameras Configuration Manual
59
