Interlogix IFS NS3550-24T/4S User Manual Download Page 65

Page: 65 / 498

User’s Manual of NS3550-24T/4S

4.2.11 System Log

The switch system log information is provided here. The System Log screen is shown in

Figure 4-2-14

Figure 4-2-14

System Log Page Screenshot

The page includes the following fields:

Object

Description



The ID (>= 1) of the system logging entry.



Level

The level of system logging entry. The following level types are supported:

Info

: Information level of the system log.

Warning

: Warning level of the system log.

Error

: Error level of the system log.

All

: All levels.



Time

The time of the system log entry.



Message

The message of the system logging entry.

Buttons

Auto-refresh

: Check this box to enable an automatic refresh of the page at regular intervals.

: Click to refresh the page; any changes made locally will be undone.

: Clear all statistics.

: Hide the statistics.

: Download the statistics.

: Updates the system log entries, starting from the first available entry ID.

: Updates the system log entries, ending at the last entry currently displayed.

: Updates the system log entries, starting from the last entry currently displayed.

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Search results

Summary of Contents for IFS NS3550-24T/4S

Reviews:

Related manuals for IFS NS3550-24T/4S

Brands by name

Popular brands

Interlogix IFS NS3550-24T/4S, User Manual

Search results

Summary of Contents for IFS NS3550-24T/4S

Reviews:

Related manuals for IFS NS3550-24T/4S

Brands by name

Popular brands