Interlogix IFS NS3550-24T/4S, User Manual

Page: 256 / 498

256
Figure 4-13-5
Dynamic ARP Inspection Table Page Screenshot
Navigating the ARP Inspection Table
Each page shows up to 999 entries from the Dynamic ARP Inspection table, default being 20, selected through the "
entries per
page
" input field. When first visited, the web page will show the first 20 entries from the beginning of the Dynamic ARP Inspection
Table.
The "
Start from port address
", "
VLAN
", "
MAC address
" and "
IP address
" input fields allow the user to select the starting point
in the Dynamic ARP Inspection Table. Clicking the “
Refresh
” button will update the displayed table starting from that or the
closest next Dynamic ARP Inspection Table match. In addition, the two input fields will - upon a “
Refresh
” button click - assume
the value of the first displayed entry, allowing for continuous refresh with the same start address.
The “
>>
” will use the last entry of the currently displayed as a basis for the next lookup. When the end is reached the text "No
more entries" is shown in the displayed table. Use the “
|<<
” button to start over.
The page includes the following fields:
Object Description

Port
The port number for which the status applies. Click the port number to see the
status for this particular port.

VLAN ID
The VLAN ID of the entry.

MAC address
The MAC address of the entry.

IP Address
The IP address of the entry.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Refreshes the displayed table starting from the "Start from MAC address" and "VLAN" input fields.
: Flushes all dynamic entries.
: Updates the table starting from the first entry in the MAC Table, i.e. the entry with the lowest VLAN ID and MAC address.
: Updates the table, starting with the entry after the last entry currently displayed.