Interlogix IFS NS3550-24T/4S User Manual Download Page 426

Page: 426 / 498

426

Parameters:

<policy_list>

: List of policies to delete

Example:

Delete the policy 1

SWITCH/>

lldpmed policy delete 1

LLDPMED Policy Add

Description:

Adds a policy to the list of polices.

Syntax:

LLDPMED policy add

gnaling] [tagged|untagged] [<vlan_id>] [<l2_priority>] [<dscp>]

Parameters:

voice

: Voice for use by dedicated IP Telephony handsets and other similar appliances supporting interactive

voice services. These devices are typically deployed on a separate VLAN for ease of

deployment and enhanced security by isolation from data applications

voice_signaling

: Voice Signaling (conditional) for use in network topologies that require a different policy for the voice

signaling than for the voice media.

guest_voice

: Guest Voice to support a separate limited feature-set voice service for guest users and visitors with

their own IP Telephony handsets and other similar appliances supporting interactive voice

services.

guest_voice_signaling

: Guest Voice Signaling (conditional) for use in network topologies that require a different policy

for the guest voice signaling than for the guest voice media.

softphone_voice

: Softphone Voice for use by softphone applications on typical data centric devices, such as PCs or

laptops. This class of endpoints frequently does not support multiple VLANs, if at all,and are

typically configured to use an untagged VLAN or a single tagged data specific VLAN.

video_conferencing

: Video Conferencing is for use by dedicated Video Conferencing equipment and other similar

appliances supporting real-time interactive video/audio services.

streaming_video

: Streaming Video is for use by broadcast or multicast based video content distribution and other

similar applications supporting streaming video services that require specific network policy

treatment. Video applications relying on TCP with buffering would not be an intended use of this

application type.

video_signaling

: Video Signaling (conditional) for use in network topologies that require a separate policy for the video

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Search results

Summary of Contents for IFS NS3550-24T/4S

Reviews:

Related manuals for IFS NS3550-24T/4S

Brands by name

Popular brands

Interlogix IFS NS3550-24T/4S, User Manual

Search results

Summary of Contents for IFS NS3550-24T/4S

Reviews:

Related manuals for IFS NS3550-24T/4S

Brands by name

Popular brands