manualshive.com logo in svg

Interlogix IFS NS3550-24T/4S, User Manual

The Interlogix IFS NS3550-24T/4S is a cutting-edge network switch - a reliable and high-performance solution for seamless data transmission. For a comprehensive understanding of its features and settings, users can conveniently access the detailed User Manual. It is available for free download at manualshive.com, offering valuable resources at your fingertips.

Share
Download
background image

 

 
 

2

Copyright 

© 2012 UTC Fire & Security. All rights reserved. 
This document may not be copied in whole or in part or otherwise reproduced 
without prior written consent from UTC Fire & Security, except where specifically 
permitted under US and international copyright law. 

Disclaimer 

The information in this document is subject to change without notice. UTC Fire & 
Security assumes no responsibility for inaccuracies or omissions and specifically 
disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a 
consequence, directly or indirectly, of the use or application of any of the contents 
of this document. For the latest documentation, contact your local supplier or visit 
us online at www.interlogix.com. 
This publication may contain examples of screen captures and reports used in 
daily operations. Examples may include fictitious names of individuals and 
companies. Any similarity to names and addresses of actual businesses or 
persons is entirely coincidental. 

Trademarks and 

patents 

The Interlogix name and logo are trademarks of UTC Fire & Security. 

The IFS name and logo are trademarks of UTC Fire & Security. 

Other trade names used in this document may be trademarks or registered 
trademarks of the manufacturers or vendors of the respective products. 

Intended use 

Use this product only for the purpose it was designed for; refer to the data sheet 
and user documentation for details. For the latest product information, contact 
your local supplier or visit us online at www.interlogix.com. 

Manufacturer 

UTC Fire & Security Americas Corporation, Inc.  
2955 Red Hill Avenue 
Costa Mesa, CA 92626-5923, USA  
EU authorized manufacturing representative: 
UTC Fire & Security B.V., Kelvinstraat 7,  
6003 DH Weert, The Netherlands 

Certification 

 

 

N4131 

FCC compliance 

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment generates, uses, and 
can radiate radio frequency energy and, if not installed and used in accordance 
with the instruction manual, may cause harmful interference to radio 
communications. 
You are cautioned that any changes or modifications not expressly approved by 
the party responsible for compliance could void the user's authority to operate the 
equipment. 

ACMA compliance 

Notice!

 This is a Class A product. In a domestic environment this product may 

cause radio interference in which case the user may be required to take adequate 
measures. 

Canada 

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe A est conforme á la norme NMB-003du 
Canada.

 

European Union directives 

2004/108/EC (EMC Directive): 

Hereby, UTC Fire & Security declares that this 

device is in compliance with the essential requirements and other relevant 
provisions of Directive 2004/108/EC.

 

 

 

 

2002/96/EC (WEEE directive): 

Products marked with this symbol cannot be 

disposed of as unsorted municipal waste in the European Union. For proper 
recycling, return this product to your local supplier upon the purchase of 
equivalent new equipment, or dispose of it at designated collection points. For 
more information see: www.recyclethis.info.

 

Contact information 

For contact information see our Web site: 

www.interlogix.com

. 

Contact support 

www.interlogix.com/customer support

 

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS NS3550-24T/4S

S&C 2000 series Instructions For Field Assembly And Installation preview
2000 series
Brand: S&C Pages: 26
S&C 2000 series Installation And Operation Manual preview
2000 series
Brand: S&C Pages: 37
S&C 2000 series Installation Manual preview
2000 series
Brand: S&C Pages: 28
GE GuardSwitch 300 Series Quick Start Manual preview
GuardSwitch 300 Series
Brand: GE Pages: 4
Eaton NR Installation And Operation Instructions Manual preview
NR
Brand: Eaton Pages: 12
QCT QuantaMesh T1048-LB9 Installation Manual preview
QuantaMesh T1048-LB9
Brand: QCT Pages: 42
ABB eOT Series Installation Instructions Manual preview
eOT Series
Brand: ABB Pages: 10
IOGear GUH420 Quick Start Manual preview
GUH420
Brand: IOGear Pages: 1
LevelOne Infinity IES-1881 Quick Installation Manual preview
Infinity IES-1881
Brand: LevelOne Pages: 2
Phoenix Contact FL SWITCH SFN 16TX Installation Notes For Electricians preview
FL SWITCH SFN 16TX
Brand: Phoenix Contact Pages: 6
StarTech.com 8STSV231DDVDUA Manual preview
8STSV231DDVDUA
Brand: StarTech.com Pages: 16
Hamlet XUSB370MS User Manual preview
XUSB370MS
Brand: Hamlet Pages: 2
Lionel O-72 Owner'S Manual preview
O-72
Brand: Lionel Pages: 8
axing SPU 81-00 Operation Instructions preview
SPU 81-00
Brand: axing Pages: 4
Justin JH-810 User Manual preview
JH-810
Brand: Justin Pages: 8
Alcatel-Lucent OmniAccess 6000 Installation Manual preview
OmniAccess 6000
Brand: Alcatel-Lucent Pages: 76
Aviosys IP Power 9258 DS User Manual preview
IP Power 9258 DS
Brand: Aviosys Pages: 37
Black Box LH8112A Installation And User Manual preview
LH8112A
Brand: Black Box Pages: 132

Brands by name

Popular brands

Load more brands