manualshive.com logo in svg

Interlogix IFS NS3550-24T/4S, User Manual

The Interlogix IFS NS3550-24T/4S is a cutting-edge network switch - a reliable and high-performance solution for seamless data transmission. For a comprehensive understanding of its features and settings, users can conveniently access the detailed User Manual. It is available for free download at manualshive.com, offering valuable resources at your fingertips.

Share
Download
background image

User’s Manual of NS3550-24T/4S 

 

 

209 

 

present and valid, the port's Port VLAN ID will be changed to this VLAN 
ID, the port will be set to be a member of that VLAN ID, and the port will 
be forced into VLAN unaware mode. Once assigned, all traffic arriving on 
the port will be classified and switched on the RADIUS-assigned VLAN 
ID. 
If (re-)authentication fails or the RADIUS Access-Accept packet no 
longer carries a VLAN ID or it's invalid, or the supplicant is otherwise no 
longer present on the port, the port's VLAN ID is immediately reverted to 
the original VLAN ID (which may be changed by the administrator in the 
meanwhile without affecting the RADIUS-assigned). 
This option is only available for single-client modes, i.e. 

• Port-based 802.1X 
• Single 802.1X

 

For trouble-shooting VLAN assignments, use the 
"Monitor

→

VLANs

→

VLAN Membership and VLAN Port" pages. These 

pages show which modules have (temporarily) overridden the current 
Port VLAN configuration. 

 

RADIUS attributes used in identifying a VLAN ID: 

RFC2868 and RFC3580 form the basis for the attributes used in identifying a 
VLAN ID in an Access-Accept packet. The following criteria are used: 

-  The Tunnel-Medium-Type, Tunnel-Type, and Tunnel-Private-Group-ID 

attributes must all be present at least once in the Access-Accept packet. 

-  The switch looks for the first set of these attributes that have the same 

Tag value and fulfil the following requirements (if Tag == 0 is used, the 
Tunnel-Private-Group-ID does not need to include a Tag): 

-  Value of Tunnel-Medium-Type must be set to "IEEE-802" (ordinal 6). 

-  Value of Tunnel-Type must be set to "VLAN" (ordinal 13). 

- Value 

of 

Tunnel-Private-Group-ID 

must be a string of ASCII chars in the 

range '0' - '9', which is interpreted as a decimal string representing the 
VLAN ID. Leading '0's are discarded. The final value must be in the 
range [1; 4095]. 

 

Guest VLAN Enabled 

When Guest VLAN is both globally enabled and enabled (checked) for a given 
port, the switch considers moving the port into the Guest VLAN according to the 
rules outlined below. 
This option is only available for EAPOL-based modes, i.e.: 

• Port-based 802.1X 
• Single 802.1X 
• Multi 802.1X

 

For trouble-shooting VLAN assignments, use the "Monitor

→

VLANs

→

VLAN 

Membership and VLAN Port" pages. These pages show which modules have 
(temporarily) overridden the current Port VLAN configuration. 

Guest VLAN Operation: 

When a Guest VLAN enabled port's link comes up, the switch starts transmitting 
EAPOL Request Identity frames. If the number of transmissions of such frames 
exceeds Max. Reauth. Count and no EAPOL frames have been received in the 
meanwhile, the switch considers entering the Guest VLAN. The interval between 
transmissions of EAPOL Request Identity frames is configured with EAPOL 
Timeout. If Allow Guest VLAN if EAPOL Seen is enabled, the port will now be 
placed in the Guest VLAN. If disabled, the switch will first check its history to see if 
an EAPOL frame has previously been received on the port (this history is cleared 
if the port link goes down or the port's Admin State is changed), and if not, the port 
will be placed in the Guest VLAN. Otherwise it will not move to the Guest VLAN, 
but continue transmitting EAPOL Request Identity frames at the rate given by 
EAPOL Timeout. 

Once in the Guest VLAN, the port is considered authenticated, and all attached 
clients on the port are allowed access on this VLAN. The switch will not transmit 
an EAPOL Success frame when entering the Guest VLAN. 

While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if 
one such frame is received, the switch immediately takes the port out of the Guest 
VLAN and starts authenticating the supplicant according to the port mode. If an 
EAPOL frame is received, the port will never be able to go back into the Guest 

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS NS3550-24T/4S

OEZ PS-LT Instructions For Use preview
PS-LT
Brand: OEZ Pages: 5
Under Control 2918 Instructions For Use Manual preview
2918
Brand: Under Control Pages: 9
ATEN CN8000 KVM on the NET Quick Start Manual preview
CN8000 KVM on the NET
Brand: ATEN Pages: 2
AMX Enova DGX 100 Series Quick Start Manual preview
Enova DGX 100 Series
Brand: AMX Pages: 2
Emulex InSpeed 350 User Manual preview
InSpeed 350
Brand: Emulex Pages: 75
Guntermann & Drunck UserCenter 2 Operating Instructions Manual preview
UserCenter 2
Brand: Guntermann & Drunck Pages: 20
IPGARD SDHN-4D-P Quick Start Manual preview
SDHN-4D-P
Brand: IPGARD Pages: 2
Enterasys SecureStack B2 B2G124-48P Hardware Installation Manual preview
SecureStack B2 B2G124-48P
Brand: Enterasys Pages: 91
Allen-Bradley ferrogard gd2 Installation Instructions preview
ferrogard gd2
Brand: Allen-Bradley Pages: 4
Altinex 400-0226-003 User Manual preview
400-0226-003
Brand: Altinex Pages: 14
3Com 4200G PWR Getting Started Manual preview
4200G PWR
Brand: 3Com Pages: 104
Eaton Cutler-Hammer NTV Series Instruction Bulletin preview
Cutler-Hammer NTV Series
Brand: Eaton Pages: 28
Grizzly G8295 Instruction Sheet preview
G8295
Brand: Grizzly Pages: 2
K&S KS ATS 4/25 Gasoline Manual preview
KS ATS 4/25 Gasoline
Brand: K&S Pages: 9
3Com SuperStack II 3C16671A User Manual preview
SuperStack II 3C16671A
Brand: 3Com Pages: 8
3Com SuperStack 4 3C16479 User Manual preview
SuperStack 4 3C16479
Brand: 3Com Pages: 8
Kramer VS-169TP User Manual preview
VS-169TP
Brand: Kramer Pages: 45
Wise P941 Instruction Manual preview
P941
Brand: Wise Pages: 8

Brands by name

Popular brands

Load more brands