UltraView PTZ
User Manual
20
Presets
UltraView PTZ cameras can store up to 129 preset positions (numbered 0 to 128). To enter preset positions, do
the following:
Zoom variable tilt
Enable or disable to limit the camera tilt function. When disabled
this feature prevents the dome housing from appearing in the
video image during operation at 1X electronic zoom (
Figure 44
).
The tilt function is then limited to between 0 and 79 degrees at 1X
electronic zoom. However, when the electronic zoom is increased
to
6X
, the full tilt travel of 90 degrees becomes functional.
•
Select option
1
to disable full tilt travel at 1X electronic
zoom (Default).
•
Select option
2
to enable full tilt travel of 90 degrees for
all electronic zoom levels.
Note:
This feature is automatically disabled when setting presets or
shadow tours.
Figure 44.Zoom variable tilt menu
1. From the
Program select
menu, navigate to option
2
and
pan right. The
Preset programming
menu displays
(
Figure 45
).
2. Move the camera to the desired position.
3. Press the
iris +
button.
4. Enter a three-digit number to indicate the preset position
(000 to 128). The lowest unused preset number will
display automatically.
Note:
Preset numbers 62 and 63 are reserved for autopan limit
settings but can be used as regular presets.
A message displays for two seconds to confirm that the
preset position has been stored.
5. Repeat steps 3 through 5 for all additional preset
positions to be stored.
6. Press
iris-
to return to the
Program select
menu.
Note:
When setting preset outside of the menus you can only
set presets 1 to 127.
Figure 45.Preset programming menu