![background image](http://html1.mh-extra.com/html/interlogix/cyh-4101/cyh-4101_user-manual_2077134040.webp)
UltraView PTZ
User Manual
30
To better understand preset tour programming, review the following abbreviations:
•
ST = Step of the preset. May have up to 64 presets and must be set for a preset tour.
•
POS = Preset number assigned to that step of the tour.
•
DW = Dwell time, or amount of time the position is held before moving.
•
SPD = Speed that the camera travels to the next preset.
•
ZM (also FZ or ZO) = Freezes the last image while moving to the next preset. ZO zooms out first,
moves to the next preset, then zooms to the preset number’s zoom factor.
•
TTL = Turns the preset title on or off.
5. For each step programmed, the following information
must be entered:
•
The preset number (0 to 128).
•
The dwell time at each step (1 to 31 seconds). The
default dwell time is 2 seconds.
•
The speed at which the camera moves between
presets. There are three speed settings: SLW (slow),
MED (medium), and FST (fast). Press the
iris +
to
cycle through the speed settings.
•
The zoom level (freeze (FZ) or zoomed out (ZO) or
normal (--)).
•
The title (TTL) (on or off).
6. To finish programming a tour, select the step number and
press the
iris -
key. The
PTZ tour programming
menu
displays.
Note:
If the step number is not selected, pressing the
iris -
key
will delete the step.
7. Navigate to option
2
to play the tour, to verify, and press
the
iris +
to exit back to the previous menu.