![background image](http://html1.mh-extra.com/html/interlogix/cyh-4101/cyh-4101_user-manual_2077134020.webp)
UltraView PTZ
User Manual
10
Auto Return
Set the camera to automatically return to an activity after a period
of inactivity, to a
home
position (preset 000), a specific preset, a
preprogrammed tour, or autopan mode (
Figure 12
). This feature
is disabled by default.
•
To disable the autoreturn feature, select option 1. Default
is Disable.
•
To automatically return to the home position (preset 000),
select option
2
.
•
To automatically return to a preset position, select option
3, press
iris +
, and choose the preset to return to.
•
To automatically return to a preprogrammed tour, select
option 4, press
iris +
, and choose the preprogrammed
tour you want to return to.
•
To automatically return to autopan, select option 5.
Figure 12.Autoreturn menu
If you choose to autoreturn to a certain setting, set the period of
inactivity (return time) referenced in the
Autoreturn
menu
(
Figure 13
). Access the time selection option by pressing the
joystick after selecting any option other than
Disable
.
The minimum return time is 15 seconds. The maximum return
time is 60 minutes. Use the joystick to increase or decrease the
return time for items
2
through
5
in the following increments:
•
Increments of fifteen seconds to increase the return time
from 15 to 60 seconds.
•
Increments of one minute to increase the return time from
one to ten minutes.
•
Increments of five minutes to increase the return time
from ten to 60 minutes.
Figure 13.Autoreturn timer
Azimuth indicator
Enable a direction indicator to be displayed on the monitor/screen
(
Figure 14
).
•
To disable the azimuth indicator select option
1
.
(The default setting is 1,
Disable
.)
Figure 14.Azimuth indicator menu