Chapter 1
Programming
23
To assign and edit area titles, do the following:
1. Confirm that the cursor (arrow) is under the area ###.
2. To move the display location for the title up or down on the screen, move the joystick up or down. (The
title cannot be moved left or right.)
3. To enter or edit the title, move the cursor to the right (inside the parenthesis).
4. Move the joystick up and down to scroll to the desired alphanumeric character. (See
Titles/areas
on
page 21 for available characters.)
5. Move the joystick right and left to move to the next character or edit the previous character.
6. When the title is complete, press the
iris +
button to save the title and return to the
Assigning area titles
menu.
7. Repeat steps 3 through 5 of the previous process, and steps 1 through 6 of this process for any
additional area titles. Otherwise, press
iris -
to return to the previous menu.
Note:
To make the defined area blank, use ‘?’ as the first character of the title. The title will display but not the
video.
3. Use the keypad to enter the number (01 to 16) of the area
to be programmed and titled. The
Area 01 programming
menu displays.
Figure 50.
Area 01 programming menu
4. To define the boundaries of an area, use the joystick to
pan/tilt the camera to the upper left corner of the desired
area and press the
iris +
button.
5. Use the joystick to pan/tilt the camera to the lower right
corner of the desired area and press the
iris +
button.
6. The
Title entry
menu displays (
Figure 51
).
Figure 51.Title entry menu