UltraView PTZ
User Manual
4
Programming shortcuts
This section lists the keypad programming shortcuts for presets and tours. For detailed instructions, refer to the
KTD-405/KTD-405A/KTD-405-2D Controller Keypad User Manual
.
Presets:
•
To store: Position the camera. Press the
store
key and then enter the preset number. Press
store
again.
•
To call up: Press
find
and enter the preset number.
Shadow Tours:
•
To store: Press and hold the
esc
key and then press the
tour
key. Then press the + side of the zoom,
focus, or iris key to start recording a shadow tour. Athe end of the shadow tour, press
esc
.
Accessing programming menus
To access the programming menus using the keys on a KTD-405 keypad, do the following:
1. Switch the keypad to the camera site you want to program.
2. Press and hold the
set
key until
Enter programming code
displays.
3. At the code entry display, enter the programming code
9
,
5
,
1
. Then press the
seq
button.
4. At the first menu display, press
3
.
5. At the
Enter camera site number
screen, enter the site number of the camera you wish to program.
At this point, you have access to the UltraView PTZ programming menus. For more information on the
programming menus, see
Menu navigation
on page 5.
Note:
If you are prompted to enter a password, refer to
Passwords
on page 33 for the default pass code key.