Intergraph TD-x10 Setup, System Reference Manual

Page: 83 / 98

73
9. Current will always be flowing from the +12 V output to the fans.
10. No output may exceed 240 VA under any condition.
Cable Connectors
The following table shows the cable connectors from the power supply the system board and to other
devices in the system. The connectors and pinouts are the same for the 200 Watt and 300 Watt power
supplies.
Connector Device Connector Device
P1 System Board P6 Hard Disk Drive
P2 System Board P7 CD-ROM Drive
P3 System Board P8 Hard Disk Drive
P4 System Board P9 Floppy Drive or Combo Drive
P5 System Board
P1 Pinout
Pin Signal Wire Color
1 Power Good Green
2 +5V Red
3 +12V Yellow
4 -12V (Key) Blue
5 Ground Black
6 Ground Black
P2 Pinout
Pin Signal Wire Color
1 Return (Key) Black
2 Return Black
3 -5V White
4 +5V Red
5 +5V Red
6 +5V Red
P3 Pinout
Pin Signal Color
1 +5V Red
2 +5V (Key) Red
3 +5V Red
4 Return Black
5 Return Black
6 Return Black