Intergraph TD-x10 Setup, System Reference Manual

Page: 12 / 98

2
ISA I/O Panel Plunger
2. Lift up the top cover above the ISA I/O panel and pull it up and back.
3. Set the top cover aside. The following figure shows inside the base unit.
Floppy
Disk Drive
CD-ROM
Drive
Power Supply
SCSI Terminator
Card
System Hard Disk
Drive Bracket
Riser Card
System
Board
Memory Sockets
Peripheral
Brace
Avoiding Electrostatic Discharge
Some of the sensitive components inside the base unit can be damaged by static electricity. To
minimize this possibility, take the following precautions when working with the internal components of
the system.
u
To maintain ground, do not unplug the power cord from the base unit, AC outlet, or UPS.
u
Touch the bare metal of the base unit to discharge any accumulated electrostatic charge.
u
Do not service the system on surfaces known to have high electrostatic buildup, such as rugs and
carpets. Work on a static-safe surface instead.