46
Blank video image or poor quality video image is captured during a video
capture sequence, and the input video source is an SDI device.
u
Verify that the video input source is connected to the SDI IN port on the StudioZ board
edge panel.
u
Verify that the StudioZ driver is configured for the correct video input format (NTSC or
PAL) and is compatible with the external video source format (NTSC or PAL).
u
Verify that the Video Quality value selected during the capture sequence is reasonable
for the video material being captured. Refer to Chapter 3, “Capturing and Playing Back
Video,” for information about the Video Quality value.
u
Verify that the external video source is powered on and operational.
Poor quality video image, bad colors, or blank screen is displayed on the SDI
output during a video capture sequence or a normal playback sequence.
u
Verify that the external video display monitor is connected to the SDI OUT port on the
StudioZ board edge panel.
u
Verify that the StudioZ driver is configured for the correct video input format (NTSC or
PAL) and is compatible with the external video source format (NTSC or PAL).
u
Verify that the Video Quality value selected during the capture sequence is reasonable
for the video material being captured. Refer to Chapter 3, “Capturing and Playing Back
Video,” for information about the Video Quality value.
u
Verify that the external video source is powered on and operational.
u
Verify that the external video display monitor is powered on and operational.
Poor quality video image, bad colors, or blank screen is displayed on the
S-video output during a video capture sequence or a normal playback
sequence.
u
Verify that the external video display monitor is connected to the S-video Output port on
the StudioZ board edge panel.
u
Verify that the StudioZ driver is configured for the correct video input format (NTSC or
PAL) and is compatible with the external video source format (NTSC or PAL).
u
Verify that the Video Quality value selected during the capture sequence is reasonable
for the video material being captured. Refer to Chapter 3, “Capturing and Playing Back
Video,” for information about the Video Quality value.
u
Verify that the external video source is powered on and operational.
u
Verify that the external video display monitor is powered on and operational.
