Intergraph InterServe 80 SL, System Setup

Page: 62 / 106

48
Chipset
The Chipset Setup menu contains the parameters that affect the functionality of some
hardware components.
On-Board SCSI Controller (Supervisor)
When set to Enabled (default), this parameter activates the on-board, PCI-based SCSI
controller. The SCSI controller can be disabled by changing the value to Disabled. This
parameter can be modified only by the Supervisor.
On-Board Network Controller (Supervisor)
This parameter enables or disables the network processor circuitry on the system board. The
default is Enabled.
On-Board Sound Controller
This parameter enables or disables the sound processor circuitry on the system board. The
default is Enabled.
USB Function
When set to Enabled (default), this parameter activates the system’s two Universal Serial
Bus (USB) ports.
H/W Monitor, Primary I/O Port
This parameter reserves the I/O port used by the Hardware Monitor. The default is 220-
229hh. Options are 190-199h, 390-399h, and Disabled..
H/W Monitor, IRQ
This parameter reserves an IRQ for the Hardware Monitor. The default is IRQ 15. Options
are 5, 7, 10, 11, and 15.
Server Monitor, I/O Select
This parameter allows you to choose the I/O address range the InterSite Server Monitor
(ISM) card uses. The default is 110-113, and other options are Disabled, 210-213, and 310-
313.