Intergraph InterServe 80 SL, System Setup

Page: 25 / 106

11
If the system is connected to a network, obtain and record the following information from
your network administrator:
u
Computer name for your system: __________________________________
u
Workgroup name (if the system will be
part of a workgroup):
__________________________________
u
Domain name (if the system will be part
of a Windows NT domain):
__________________________________
u
Security role for your system in the
Windows NT domain -- primary domain
controller, backup domain controller, or
domain server:
__________________________________
u
If your system will be acting as a backup
domain controller or domain server,
username and password of an authorized
domain administrator account:
__________________________________
NOTE Determine the security role for your server before beginning system configuration. You
cannot change a server to a domain controller without reinstalling Windows NT Server. A
domain controller maintains security policy and performs user authentication for a domain.
Servers may be part of a domain, although they do not have to participate in a domain. See
the operating system documentation for a detailed explanation of the differences between
domain controllers and servers.
If the system is connected to a network that uses the Transmission Control Protocol/Internet
Protocol (TCP/IP), get and record the following TCP/IP information from your network
administrator:
u
Internet Protocol (IP) address for your
system:
u
IP subnet mask for your system:
u
IP domain name for your network:
u
IP address for your network’s default
gateway:
u
IP addresses for your network’s
Domain Name System (DNS) servers,
if any:
u
IP addresses for your network’s
Windows Internet Name Service
(WINS) servers, if any: