Intergraph InterServe 80 SL, System Setup

Page: 63 / 106

49
Server Monitor, DMA Select
This parameter reserves a DMA for the ISM card. The default is DMA 6, and other options
are DMA 0, DMA 1, DMA 3, DMA 5, and DMA 7.
Server Monitor, IRQ Select
This parameter reserves an IRQ for the ISM card. The default is IRQ 5, and other options
are IRQ 7, IRQ 10, IRQ 11, and IRQ 15.
Server Monitor, Memory Select
This parameter allows you to choose the starting address for the shared memory range the
ISM card uses. Shared memory is 8K bytes long and can be placed at any (available) 8K
boundary from D0000h to DE000h. The default is DE000h, and other options are D0000h,
D2000h, D4000h, D6000h, D8000h, DA000h, DC000h.
Build MPS Table for Uniprocessor
When this parameter is set to Yes, the BIOS enables single-processor systems to use the
multi-processor kernel. The default is No.
Memory Data Integrity Mode
ECC mode (default) provides error correction for data stored in memory. Parity mode
provides error detection for data stored in memory. The other setting is None.
Fixed Memory Hole
When set to Enabled, this parameter allows the memory in a RAM option card to be patched
into a specific location in the system’s memory, to accommodate ISA cards requiring a fixed
range of addresses. The default is Disabled. Options are 512KB-640KB and 15MB-16MB.
Generate NMI on System Error
This parameter halts the system when a catastrophic error is detected. This prevents the
error from corrupting your data. The default is Enabled.
AGP Aperture Size
The default is 64MB. Options are 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, and 256MB.