manualshive.com logo in svg

Interactive Technologies SceneStation, User Manual, Page: 57 / 96

Share
Download
Interactive Technologies SceneStation User Manual Download Page 57

SceneStation Installation and Programming Guide

Using the Programmer's Remote

  |  51

Stepping Through Presets

Press the 

RIGHT

 arrow button to step to the next preset.  The next preset that the station will acti-

vate will honor the Loop and Repeat properties on each preset in the list.
Press the 

LEFT

 arrow button to step to the previous preset.  The previous preset is always the preset 

that has a number one less than the current preset.

Locking Station Buttons

To lock the front-panel buttons on a station, press the 

LOCK

 button.

The odd-numbered LEDs on the station will briefly flash Red when the buttons are locked.
To unlock the front-panel buttons on a station, press the 

LOCK

 button a second time.

The odd-numbered LEDs on the station will briefly flash Green when the buttons are unlocked.
If the user presses a front-panel button on the station while the buttons are locked, all LEDs on the 

station will flash Red to show that the station is locked, and no action will be performed.

Summary of Contents for SceneStation

































































































Reviews:

No comments