manualshive.com logo in svg

Interactive Technologies SceneStation, User Manual, Page: 23 / 96

Share
Download
Interactive Technologies SceneStation User Manual Download Page 23

SceneStation Installation and Programming Guide

Using SceneStation Studio

  |  17

If no USB RF Adaptor is connected or no wireless stations are in range, this window will remain 

empty until a station comes within range or an offline station is created or loaded from a file.

Note:

  If a station has a PIN number, the user is prevented from uploading or downloading 

data, or making changes of any kind until the proper PIN number has been entered.

Offline Stations

SceneStation Studio can also create new station files or open station files stored on the computer for 

offline editing.
A new offline station can be created by using the 

File > New

 menu item.

An existing station file can be opened for offline editing by using the 

File > Open

 menu item.

When an offline station is created or opened, it appears in the main window along with any online 

stations that have been discovered:

Offline stations show only the show name in the list view.  All other properties in the list view only 

apply to online stations.

Summary of Contents for SceneStation

































































































Reviews:

No comments