manualshive.com logo in svg

Interactive Technologies SceneStation, User Manual, Page: 43 / 96

Share
Download
Interactive Technologies SceneStation User Manual Download Page 43

SceneStation Installation and Programming Guide

Using SceneStation Studio

  |  37

Levels

The Levels tab of the station editor window is used to view and/or modify each of the preset’s DMX 

channel values:

Overview

The Levels tab of the editor window contains the following groups of controls:

 • Preset List

On the left side of this window is a list of the presets available on this station.  Select a 

preset to edit its levels.
When editing the presets for a live station that is wirelessly connected to SceneStation 

Studio, the station will output the DMX scene that is currently selected in the Preset List.

 • Channel List

Next to the preset list is a list of DMX channels and/or fixtures and their values for each 

preset.  Once a preset is selected, this list can be used to select a DMX channel or fixture 

to edit.
If fixtures are defined (by using the Patch function), then clicking on a fixture in the Channel 

Summary of Contents for SceneStation

































































































Reviews:

No comments