manualshive.com logo in svg

Interactive Technologies SceneStation, User Manual, Page: 22 / 96

Share
Download
Interactive Technologies SceneStation User Manual Download Page 22

16  |  

Using SceneStation Studio

SceneStation Installation and Programming Guide

Managing Stations

When SceneStation Studio is opened on your computer, a list view window appears that is used to 

display all stations that are found wirelessly and stations that have been newly created or loaded from 

a file.
This picture shows the main list view window of SceneStation Studio with three wireless stations:

Wireless Stations

Any stations that are discovered wirelessly by the USB RF Adaptor will appear in the list and include 

the following information:

 • Station

 - The user-defined name of the station.

 • Show

 - The name of the show currently running in the station.

 • Serial

 - The serial number of the station.

 • Version

 - The version number of the firmware running in the station.

 • Signal

 - The signal strength of the wireless signal to the station.  A colored indicator (Green, 

Yellow, Red) gives a rough estimate of the overall signal strength.

 • Channel

 - The Wireless Channel currently being used by the station’s wireless module.

Summary of Contents for SceneStation

































































































Reviews:

No comments