I N S T A L L A T I O N M A N U A L
C I T Y 2 S L I D E ™
10
Rev. 7/15 (SBK-CITY2 INSTL)
FINAL INSPECTION CHECK LIST:
1. INSPECT THE SLIDE FLUMES FOR ANY VISIBLE DAMAGE, CRACKS, OR TEARS.
2. INSPECT THE SLIDE FOR SHARP EDGES, CRACKS, TEARS OR PROTRUSIONS ON THE
LADDER, DECK FLANGES, HANDRAILS AND SLIDE FLUMES.
3. INSPECT THE SLIDE FOR ANY LOOSE OR CORRODED HARDWARE.
4. INSPECT ALL SLIDE LADDER TREADS AND STEP ATTACHMENT POINTS FOR ANY SIGN
OF BENDING, FATIGUE, SHEARING OR YIELD. A SURFACE OR LADDER TREAD SHOWING
SIGNS OF YIELD IS INDICATED BY FINE CRACKING OR CRYSTALLIZATION.
5. INSPECT THE CONNECTION OF THE SLIDE HANDRAILS FOR SECURED FASTENING AND
RIGIDITY. PROPERLY ATTACHED HANDRAILS CANNOT BE PULLED AWAY FROM THEIR
SOCKETS OR CONNECTION POINTS.
6. MEASURE THE DEPTH OF THE WATER IN FRONT OF THE SLIDE EXIT AND CONFIRM
COMPLIANCE WITH DIAGRAMS A, B & C.
7. CERTIFY THE PROPER POSITION OF THE SLIDE EXIT AS SHOWN IN DIAGRAMS D & E.
8. VERIFY THE SLIDE WARNING LABEL IS SECURELY ADHERED TO THE SLIDE.
9. GIVE THESE INSTALLATION INSTRUCTIONS TO THE CUSTOMER AND GO OVER THE
INTENDED USE INSTRUCTIONS WITH THEM.
CITY 2 SLIDE™ CARE & MAINTENANCE:
Your slide requires periodic maintenance to keep it looking like new.
• Wash monthly or more frequently, if needed. Be careful to keep cleaning material from
entering the pool.
• Wash with mild soap, such as hand dishwashing soap, and avoid using strong cleaners
or abraisives. Avoid strong alkaline (such as tri-sodium phosphate) or highly acidic cleaners.
Avoid bleach and ammonia.
* These suggestions and data based on information believed to be reliable, from our
raw materials manufacturers. They are offered in good faith, but without guarantee,
as conditions and methods of use and procedures are beyond our control.
