I N S T A L L A T I O N I N S T R U C T I O N S B Y O S 1 S L I D E
10
BYOS-IM Rev. 08/15 (SBK-BYOS INSTAL)
STEP FOUR: Variable 15˚ and 30˚ Anchor information.
The following information is for the BYOS 15A LONG and the BYOS 30A LONG Anchors and
should be reviewed before proceeding onto the next step. Our 15˚ and 30˚ anchors have
been modified to allow easier use with concrete tube forms.
We have lengthened our BYOS flume anchors to allow room for concrete chutes when using
concrete tube forms in a BYOS installation. This improved anchor design will provide more
flexibility in installation options and make your BYOS installations even easier. (Fig. 13)
32”
20”
8”
4”
Maximum Concrete
Embedment Depth
Minimum Concrete
Embedment Depth
Fig. 13
STEP FIVE: Move the slide.
Once the entire slide is assembled and resting on the anchor supports in its correct horizontal
position on the pathway, use spray paint to carefully mark the location of the anchor supports.
Next, with sufficient manpower, gently move the assembled slide (if possible) approximately
3 feet to one side.
