16
4.7 Image stabilization
PTZ default setting: baud rate 2400, address 1.
Image stabilization feature is off by default, can be turn on/off by calling number 29 preset. Open
the image stabilization function when the image is affected by external jitter, so that the image
can be displayed smoothly, but the video resolution will be declined relatively, when the image
does not appear jitter, we suggest close the image stabilization feature.
4.8 Defogging feature
PTZ default setting: baud rate 2400, address 1
Calling number 37 preset to open defogging function, then the top left of the image will display
"DEFOGGING" which indicates this feature is turned on. If demisting has completed please close
demisting function to avoid high temperature in internal body and save energy. Calling number
38 preset to turn off this feature, the image at the top left "DEFOGGING" disappears accordingly.
Note: When the camera internal temperature is below 0
℃
, the camera will open demisting
function compulsory, then you can not shut down defogging function manually; when the camera
internal temperature is higher than 55
℃
, the camera will close demisting function compulsory,
then you can not open the demisting function manually.
4.9 Area scanning
PTZ default setting: baud rate 2400, address 1
Calling number 49 preset to perform area scan function, the camera won’t perform any action if
not set the left margin area scan (number 42 presets), and right margin area (number 43 presets),
